+86-028-85255257
F-tone公司专业研发制造10G SFP+ 无源电缆、10G SFP Passive Cable,切合MSA SFF-8431, 应用于10G以太网等数据中心互联场景。100%完善兼容全系列品牌效劳器,交流机,路由器,PDH/SDH传输装备,EPON,GPON,10G EPON,10G GPON,WDM PON基站等等全系列装备
SFP+ Direct Attach Cables , 1m、3m、5m、7m、10m Reach
Features
Applications
Product Description
The SFP+ cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G fibre Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fibre Channel industry standard requirements for performance and reliability..
Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Storage Ambient Temperature |
-40 |
+85 |
°C |
||
Operating Case Temperature |
Tc |
0 |
+70 |
°C |
|
Power Supply Voltage |
VCC3 |
3.14 |
3.3 |
3.47 |
V |
Power Dissipation |
PD |
0.5 |
W |
Systems
Performance |
10.5 Gpbs line speed, full duplex Bit error rate: better than 10E-12 |
Media |
Hot-pluggable, industry-standard Small Form-Factor Pluggable(SFP+) copper cable, available as 1m,3m or 5m. |
Operating parameters |
Supply voltage: 3.3V Power consumption(per end): max 0.5W |
Supported Length
1m, 3m, or 5m typical & customer specific requirements
Pin Descriptions
Pin |
Logic |
Symbol |
Name/Description |
Notes |
1 |
VeeT
|
Transmitter Ground
|
||
2 |
LV-TTL-O |
TX_Fault |
N/A |
1 |
3 |
LV-TTL-I |
TX_DIS |
Transmitter Disable |
2 |
4 |
LV-TTL-I/O |
SDA |
Tow Wire Serial Data |
|
5 |
LV-TTL-I |
SCL |
Tow Wire Serial Clock |
|
6 |
MOD_DEF0 |
Module present, connect to VeeT |
||
7 |
LV-TTL-I |
RS0 |
N/A |
1 |
8 |
LV-TTL-O |
LOS |
LOS of Signal |
2 |
9 |
LV-TTL-I |
RS1 |
N/A |
1 |
10 |
VeeR |
Reciever Ground |
||
11 |
VeeR |
Reciever Ground |
||
12 |
CML-O |
RD- |
Reciever Data Inverted |
|
13 |
CML-O |
RD+ |
Reciever Data Non-Inverted |
|
14 |
VeeR |
Reciever Ground |
||
15 |
VccR |
Reciever Supply 3.3V |
||
16 |
VccT |
Transmitter Supply 3.3V |
||
17 |
VeeT |
Transmitter Ground |
||
18 |
CML-I |
TD+ |
Transmitter Data Non-Inverted |
|
19 |
CML_I |
TD- |
Transmitter Data Inverted |
|
20 |
VeeT |
Transmitter Ground |
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Ordering information
Part Number |
Product Description |
SFP-10GPC-X |
SFP+ Direct Attach (10GSFP+Cu), 1m, 3m, 5m, 7m 10m 0?C ~ +70?C |
SFP-10GPC-XI |
SFP+ Direct Attach (10GSFP+Cu), 1m, 3m, 5m, 7m 10m -40?C ~ +85?C
|